View HLMP-D150C0000_4601494.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T-13/4 (5 mm), T-1 (3 mm), Low Current, Double Heterojunction AlGaAs Red LED Lamps Technical Data
HLMP-D150/D155 HLMP-K150/K155 Features
* Minimum Luminous Intensity Specified at 1 mA * High Light Output at Low Currents * Wide Viewing Angle * Outstanding Material Efficiency * Low Power/Low Forward Voltage * CMOS/MOS Compatible * TTL Compatible * Deep Red Color
Applications
* Low Power Circuits * Battery Powered Equipment * Telecommunication Indicators
Description
These solid state LED lamps utilize newly developed double heterojunction (DH) AlGaAs/GaAs material technology. This LED material has outstanding light output efficiency at very low drive currents. The color is deep red at the dominant wavelength of 637 nanometres. These lamps are
ideally suited for use in applications where high light output is required with minimum power output.
3.43 (0.135) 2.92 (0.115) 3.17 (0.125) 2.67 (0.105)
Package Dimensions
6.35 (0.250) 5.58 (0.220)
4.70 (0.185) 4.19 (0.165)
1.14 (0.045) 0.51 (0.020) SHOULDER
0.65 (0.026) MAX. 24.1 MIN. (0.95) 0.55 (0.022) SQ. TYP. 0.40 (0.016)
CATHODE
A B
1.52 (0.060) 1.02 (0.040)
2.79 (0.110) 2.29 (0.090)
C
2
Selection Guide
Package Description T-1 3/4 Red Tinted Diffused Device HLMPD150 D150-C00xx D150-CD0xx T-1 3/4 Red Untinted Non-diffused T-1 Red Tinted Diffused D155 D155-F00xx K150 K150-C00xx K150-CD0xx T-1 Red Untinted Non-diffused K155 K155-CD0xx K155-D00xx K155-DE0xx Luminous Intensity Iv (mcd) at 1 mA Min. Typ. Max. 1.3 3.0 - 1.3 1.3 5.4 5.4 1.3 1.3 1.3 2.1 1.3 2.1 2.1 3.0 3.0 10.0 10.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 - 4.2 - - - - 4.2 - 4.2 - 6.8 21/2[1] Degree 65 65 65 24 24 60 60 60 45 45 45 45 Package Outline A A A B B C C C C C C C
Note: 1. 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value.
Part Numbering System
HLMP - x 1 xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads A1, B1: Right Angle Housing, Uneven Leads A2, B2: Right Angle Housing, Even Leads DD, DH: Ammo Pack Color Bin Optioms 0: Full color bin distribution Maximum Iv Bin Options 0: Open (No max. limit) Others: Please refer to the Iv bin table Minimum Iv Bin Options Please refer to the Iv bin table Lens Option 50: Tinted, Diffused 55: Untinted, Nondiffused Package Options D: T-13/4 (5 mm) K: T-1 (3 mm)
3
Absolute Maximum Ratings at TA = 25C
Peak Forward Current[1] ...................................................................................................................... 300 mA Average Forward Current ....................................................................................................................... 20 mA DC Current[2] ......................................................................................................................................... 30 mA Power Dissipation ................................................................................................................................. 87 mW Reverse Voltage (IR = 100 A).................................................................................................................... 5 V Transient Forward Current (10 s Pulse)[3] ......................................................................................... 500 mA LED Junction Temperature ..................................................................................................................... 110C Operating Temperature Range ................................................................................................... -20 to +100C Storage Temperature Range ....................................................................................................... -55 to +100C Lead Soldering Temperature [1.6 mm (0.063 in.) from body]........................................... 260C for 5 seconds
Notes: 1. Maximum IPEAK at f = 1 kHz, DF = 6.7%. 2. Derate linearly as shown in Figure 4. 3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Electrical/Optical Characteristics at TA = 25C
Symbol VF VR p d 1/2 S C RJ-PIN Description Forward Voltage Reverse Breakdown Voltage Peak Wavelength Dominant Wavelength Spectral Line Halfwidth Speed of Response Capacitance Thermal Resistance 5.0 Min. Typ. 1.6 15.0 645 637 20 30 30 260[3] 210[4] 290[5] V Luminous Efficacy 80 Im/W Note 2 Max. 1.8 Unit V V nm nm nm ns pF C/W Exponential Time Constant, e-t/TS VF = 0, f = 1 MHz Junction to Cathode Lead Test Condition IF = 1 mA IR = 100 A Measurement at Peak Note 1
Notes: 1. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the color of the device. 2. The radiant intensity, Ie , in watts per steradian, may be found from the equation Ie = lV/V, where IV is the luminous intensity in candelas and V is luminous efficacy in lumens/watt. 3. HLMP-D150. 4. HLMP-D155. 5. HLMP-K150/-K155.
4
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage.
Figure 3. Relative Luminous Intensity vs. DC Forward Current.
Figure 4. Maximum Forward DC Current vs. Ambient Temperature. Derating Based on TJ Max. = 110 C.
5
Figure 5. Relative Luminous Intensity vs. Angular Displacement. HLMP-D150.
Figure 6. Relative Luminous Intensity vs. Angular Displacement. HLMP-K150.
Figure 7. Relative Luminous Intensity vs. Angular Displacement. HLMP-D155.
Figure 8. Relative Luminous Intensity vs. Angular Displacement. HLMP-K155.
6
Intensity Bin Limits
Color Red Bin C D E F G H I J K L M N O P Q R S T U V W X Y Z Intensity Range (mcd) Min. Max. 1.5 2.4 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0
Maximum tolerance for each bin limit is 18%.
Mechanical Option Matrix
Mechanical Option Code 00 01 02 A1 A2 B1 B2 DD DH Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 Tape & Reel, straight leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag T-13/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-13/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag Ammo Pack, straight leads with minimum 2K increment Ammo Pack, straight leads with minimum 2K increment
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. Obsoletes 5968-1438EN December 11, 2001 5988-2229EN

▲Up To Search▲

Price & Availability of HLMP-D150C0000

	To Download HLMP-D150C0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .